MODEL: 4E512_F

• Band III aerials
• Impedance 75 Ohm
• F Connector
• Aluminium 

MODEL: 6E512_F

• Band III aerials
• Impedance 75 Ohm
• F Connector
• Aluminium

MODEL: SIGMA 6HD

• 6 elements
• Wideband UHF aerial for TV reception
• Dipole with F connector
• H or V polarisation
• Maximum mast clamp diameter 60mm
• Double reflector
• Impedance 75 Ohm

MODEL: SIGMA 9HD

• 9 elements
• Wideband UHF aerial for TV reception
• Dipole with F connector
• H or V polarisation
• Maximum mast clamp diameter 60mm
• Double reflector
• Impedance 75 Ohm  

MODEL: AMP9762

• Operating temperature: -10 to +55°C.
• Gain and slope adjustment in TV and SAT band
• Female F connectors
• Passive or active return path, switchable by the installer 

 MODEL: MOD90S

• Full-band stereo DSB modulator
• Non volatile channel memory
• Built in power supply
• Multi-standard modulator
• PLL crystal frequency stabilisation
• Adjustable output level 

MODEL: K120

• Channel amplifiers calibrated on the frequency requested by the customer;
• 95dBµV maximum output level for each channel
• 5 resonant circuits in VHF band and 4 in UHF allows very good filtering selectivity.
• Stabilization circuit to keep constant the internal temperature and maintain the filtering properties.
• Die-cast silver plated housing to guarantee a solid mechanical structure and improve filtering performances.
• Available for analogue terrestrial signals (KF/…)or digital terrestrial signals (KF/…DT)

 MODEL: KDF

• LNB power supply 12V/22KHz DiSEqC 1.0
• SCPC programs - C/N on channels >52 dB - Input loop-through to connect several modules at the same satellite polarity
• DSB full band modulator, one module to cover both VHF and UHF bands 

 MODEL: KP SERIES 

• Switching technology to improve reliability and performances.
• Die-cast housing to guarantee a solid mechanical structure.
• Wide range of power supply for different solutions.

MODEL: FIL26100

• Built-in control unit
• Each cluster can be programmed for the whole UHF band
• Fully agile, one unit can be used for any condition
• Active mixing, no insertion losses
• Good selectivity